The AMP-F2 is a two channel power amplifier for a system that has outgrown its integrated amplifier. It takes over the work of driving the speakers and leaves preamplification, streaming and source switching to whatever already handles them well.
Output is where it earns its place. Stereo duty into eight or four ohms suits most floorstanders, and bridged mono operation is there when a pair of demanding speakers each want an amplifier to themselves.
Inside, a Starke Sound module does the work behind beryllium copper binding posts, with balanced and unbalanced inputs so the amplifier sits comfortably in either a professional or a domestic chain. Fan noise is absent by design, which counts for a great deal in a listening room.
Twelve volt trigger connections let it wake with the rest of the system, and standby draw stays low enough to leave it connected. It is the sort of component that disappears into a rack and quietly keeps the speakers under control.
Eversolo AMP-F2 official product page
| ITEM | DESCRIPTION |
|---|---|
| Two channel or bridged mono | Runs as a stereo pair or as a single higher-output channel. |
| Balanced and unbalanced inputs | Fits a professional or a domestic signal chain. |
| Beryllium copper binding posts | Custom terminals rather than generic hardware. |
| Silent operation | No fan, so nothing intrudes in a quiet listening room. |
| Trigger wake and low standby | Powers up with the system and draws almost nothing at rest. |
| DETAIL | VALUE |
|---|---|
| Output power | 145W RMS at 8 ohms (1% THD), 250W RMS at 4 ohms (1% THD), 280W RMS at 4 ohms (1% THD, BTL), 450W RMS at 2 ohms (1% THD, BTL) |
| Gain | 21.5dB |
| Channel quantity | 2 channels |
| Amplifier type | Class D |
| Frequency response | 10Hz-20KHz －1dB |
| Maximum output current per channel | 16.5A/33A(Bridge) |
| Signal-to-noise ratio | >110dB, “A” weighted at 4 ohm 250W |
| Thd | 0.003% 10W at 1KHz |
| Input terminals | 2-Channel RCA Input, 2-Channel XLR Input |
| Input impedance (rca) | 11KΩ |
| Input impedance (xlr) | 22KΩ |
| Input sensitivity | 2.7V |
| Output terminals | 2 pairs beryllium copper binding post custom made by Starke Sound |
| Output impedance | 0.136Ω(5 Hz to 100 kHz) |
| Minimum load impedance | 0.8Ω |
| True balance circuit | Yes |
| Fan noise | None |
| Power consumption | Standby ≤0.5W, Idle ≤14W, Maximum 900W |
| Control option | 12V trigger input & output |
| Cabinet | Aluminum |
| ITEM | QUANTITY |
|---|---|
| AMP-F2 stereo power amplifier | 1 |
| AC power cord | 1 |
| Trigger in cable | 1 |
The DMP-A6 Master Gen 2 is a focused source for a modern stereo system, bringing network music and local libraries to a dedicated component. It gives digital listening a clear place in the rack without requiring a stack of separate source boxes.
A large touch display and Eversolo Control app make browsing feel direct, while support for network services keeps familiar streaming options within the same system. Local files can sit alongside them in a library that can expand as listening habits grow.
Dual conversion circuitry and a linear power supply are part of the model’s design. Balanced and unbalanced outputs let it connect to a range of amplification, while HDMI ARC brings television audio into the same listening setup.
With network, local and TV sources sharing one component, the DMP-A6 Master Gen 2 is an adaptable foundation for a two-channel system that may change over time.
Official manufacturer product page
| ITEM | DESCRIPTION |
|---|---|
| A dedicated music source | Network streaming and local music libraries share one component. |
| Two ways to browse | A touchscreen and app provide direct control. |
| Expandable local storage | An internal SSD slot supports a larger music library. |
| Stereo system flexibility | Balanced and unbalanced analogue outputs support different amplifier connections. |
| Television audio | HDMI ARC brings a television source into the system. |
| DETAIL | VALUE |
|---|---|
| Display | 6-inch LCD touchscreen |
| Internal memory | 4 GB DDR4 + 32 GB eMMC |
| DAC | 2 × ES9038Q2M |
| Operational amplifier | OPA1612 |
| Power supply | Low-noise, high-quality linear power supply |
| SSD expansion | M.2 NVMe 3.0 2280, supports up to 8 TB |
| Ethernet | RJ-45 (10/100/1000 Mbps) |
| Wireless network | 2.4G + 5G dual-band Wi-Fi |
| DAC decoding | Up to stereo DSD512, PCM 768 kHz 32-bit, MQA |
| Music streaming | Roon Ready, Spotify Connect, DLNA, TIDAL Connect |
| Bluetooth input | Bluetooth 5.0, SBC/AAC |
| USB audio input | Up to stereo DSD512, PCM 768 kHz 32-bit, MQA |
| HDMI ARC input | Up to stereo PCM 192 kHz / 24-bit |
| Dimensions | 187 × 270 × 90 mm (L × W × H) |
| ITEM | QUANTITY |
|---|---|
| DMP-A6 Master Edition Gen 2 music streamer | 1 |
| Power cable | 1 |
| USB data cable | 1 |
| Trigger cable | 1 |
| User manual | 1 |
In a lounge or listening room where music needs convincing scale, the Bronze 300 7G is the floorstander that shows what Monitor Audio's entry range can do. It is the Bronze flagship, with the cabinet volume and twin-driver layout to give drums, bass guitar and film effects genuine physical presence.
A C-CAM Gold Dome tweeter and dedicated bass-mid driver keep voices and instruments articulate above the low end. The crossover has been redesigned for this generation, allowing the drivers to hand over cleanly instead of drawing attention to separate parts of the cabinet.
The slim enclosure and three finish choices keep the 300 approachable in a real living space. Outriggers provide a stable footing, while the HiVe II port lets the speaker breathe freely when the music becomes energetic.
For current specifications and product support, visit the Monitor Audio Bronze 300 7G Floorstanding Speaker (Pair) product page.
| ITEM | DESCRIPTION |
| Main Features | |
| Two-and-a-half-way C-CAM driver system | Separate bass and bass-mid units divide the workload while maintaining a coherent transition through the vocal range. |
| Gold Dome tweeter with UD waveguide | The waveguide controls high-frequency dispersion for a wider, more consistent listening area. |
| HiVe II reflex port | A rifled port profile accelerates airflow and reduces turbulence during strong low-frequency passages. |
| New generation crossover | Revised filter components and voicing integrate the three drive units for a more even tonal balance. |
| Stable outrigger base | A wide plinth and spike assembly support the tall cabinet on hard floors or carpet. |
| DETAIL | VALUE |
| Technical Specifications | |
| Frequency response | 34 Hz - 30 kHz |
| Sensitivity | 88 dB |
| Nominal impedance | 8 Ohms |
| Recommended amplifier power | 75 - 300 W into 4 Ohms 40 - 150 W into 8 Ohms |
| Power handling | 150 W |
| Dimensions | 1005 x 269 x 392 mm (39 9/16 x 10 5/8 |
| Weight | 15.6 kg (34 lb 6 oz) |
| Available finishes | Black, Walnut, White |
| Sold as | Pair |
| Driver complement | 1 x 6 in C-CAM Bass-mid driver; 1 x 6 in C-CAM Bass driver; 1 x 1 in C-CAM Gold Dome tweeter with UD waveguide |
Have a question about this product or want help matching it to your space? Send the item through and our team will respond with the right advice.
